Keys and doors / Alarm system 2-25
The notifications regarding the map lights , dome light and cargo area light are deactivated as the factory setting . A SUBARU dealer can activate the system . Contact your SUBARU dealer for details .
& Arming the system
S02AF04
The alarm system becomes armed when the following operation is performed .
1 . Close all windows and the moonroof ( if equipped ) and turn the ignition switch to the “ OFF ” position .
2 . Carry the key and get out of the vehicle .
3 . Make sure that the engine hood is closed .
4 . Lock the doors using any of the following methods . . Locking using the remote keyless entry system . For details , refer to “ Remote keyless entry system ” F2-17 . . Locking using the keyless access function ( if equipped ). For details , refer to “ Locking with the door lock sensor ” F2-8 . . Locking using the power door locking switch . For details , refer to “ Locking using power door locking switch ” F2- 21 .
NOTE
Security indicator light
. All doors and the rear gate will lock , an electronic chirp will sound once , the hazard warning flashers will flash once , and the security indicator light will start flashing rapidly . . If any of the doors or the rear gate is not fully closed , an electronic chirp sounds five times , the hazard warning flashers flash five times to alert you that the doors ( or the rear gate ) are not properly closed . When you close the door , doors will automatically lock .
5 . Approximately 30 seconds later , the system will enter surveillance state .
When the system is in surveillance state , the security indicator light will then flash slowly ( twice approximately every 2 seconds ), indicating that the system has been armed for surveillance .
NOTE
. The system can be armed even if the windows and / or moonroof are open . Always make sure that they are fully closed before arming the system . . The 30-second standby time can be eliminated if you prefer . Have it performed by your SUBARU dealer . . If any of the following actions is done during the standby period , the system will not switch to the surveillance state . – Doors ( including the rear gate ) are unlocked using the access key fob / remote transmitter . – Doors ( including the rear gate ) are unlocked using the keyless access function ( models with “ keyless access with push-button start system ”). – Any door ( including the rear gate ) is opened . – The ignition switch is turned to the “ ON ” position ( models without “ keyless access with push-button start system ”).
– CONTINUED –