Keys and doors / Door locks 2-23
– When the select lever is shifted into a position other than the “ P ” position ( CVT models ).
. For automatic door unlocking – When the driver ’ s door is open ( factory default setting ). – When the ignition switch is turned to the “ OFF ” position . – When the select lever is shifted into the “ P ” position ( CVT models ).
NOTE
. The automatic door locking / unlocking function can be changed by a SUBARU dealer . Consult your SUBARU dealer for details . Also , for models with a combination meter display ( color LCD ), the setting can be changed using the display . For details , refer to “ Auto Door Lock and Unlock ” F3-42 . . When locking the door by operating the power door locking switches , automatic door locking will not operate . . When unlocking the door by operating the power door locking switches , automatic door unlocking will not operate . . When getting out of the vehicle from a rear door , make sure to unlock all the doors by pushing the unlock side of the power door locking switch . If a rear door is unlocked from the inside door lever then the door is opened and closed , the Key lock-in prevention function will be triggered . All doors will be unlocked , the Key lock-in prevention warning indicator “ ” will appear and the warning chime will also sound .
& Key lock-in prevention function
S02AC06
Under the following conditions , all the doors will not lock when the power door locking switch is pushed with the front door open .
. The key is still in the ignition switch ( models without “ keyless access with push-button start system ”).
. The ignition switch is in the “ ACC ” or “ ON ” position ( models with “ keyless access with push-button start system ”).
NOTE
. When leaving the vehicle , make sure you are holding the key before locking the doors . . The factory setting ( default setting ) for this function is set as “ operational ”. This function ’ s operational / non-operational setting can be changed by a SUBARU dealer . Contact a SUBARU dealer for details .
! Non-operation of key lock-in prevention function
S02AC0602
When the system is set so that it does not operate , the doors are locked by the following operation .
. If the lock lever is turned to the front (“ LOCK ”) position with the driver ’ s door open and the driver ’ s door is then closed with the lock lever in that position , the driver ’ s door is locked .
. If the spare key is used to lock the driver ’ s door from the outside of the vehicle , the door is locked .
& Battery drainage prevention function
S02AC03
If a door or the rear gate is not completely closed , the interior lights will remain illuminated as a result . However , several lights are automatically turned off by the battery drainage prevention function to prevent the battery from discharging . The following interior lights are affected by this function .
Item
Map lights
Dome light
Switch position
DOOR
DOOR
Automatically turning off
Approximately 20 minutes later
Approximately 20 minutes later
– CONTINUED –