Keys and doors / Keyless access with push-button start system 2-13
! By operating the driver ’ s door
S02AP070101
1 . Sit in the driver ’ s seat , and close the door .
2 . Push “ ” of the power door locking switch .
3 . Within 5 seconds after step 2 is performed , open the driver ’ s door .
4 . Within 5 seconds after step 3 is performed , push “ ” of the power door locking switch twice while the door is open .
5 . Within 10 seconds after step 4 is performed , close and open the driver ’ s door twice .
6 . Within 10 seconds after step 5 is performed , push “ ” of the power door locking switch twice while the door is open .
7 . Within 10 seconds after step 6 is performed , close and open the driver ’ s door once .
8 . Within 5 seconds after step 7 is performed , close the door .
A chirp sound will be heard , and the functions will be disabled .
NOTE
In steps 4 and 6 , press the power door locking switch slowly . If the switch is pressed quickly , the functions may not be disabled .
! Enabling functions
S02AP0702
When the procedure to disable the functions is performed again , a chirp sound will be heard , and the functions are enabled .
NOTE
. The keyless access function will be enabled only if you perform the procedure in the same manner you disabled the function ( for example , when disabling by operating the driver ’ s door , the function will not be enabled even if you operate the access key fob ). . Press the push-button ignition switch if you do not know the procedure in which the keyless access function was disabled . – When disabling by operating the driver ’ s door : A chirp will not be heard .
– When disabling by operating the access key fob : A chirp will be heard .
& Selecting audible signal operation
S02AP12
Using an electronic chirp , the system will give you an audible signal when the doors lock and unlock . If desired , you may turn the audible signal off . For more details , contact a SUBARU dealer .
NOTE
For models with the combination meter display ( color LCD ), the setting can be changed by operating the combination meter display ( color LCD ). For details , refer to “ Vehicle Setting ” F3-41 .
& Warning chimes and warning indicator
S02AP06
The keyless access with push-button start system sounds a warning chime and flashes the access key warning indicator on the combination meter in order to minimize improper operations and help protect your vehicle from theft .
For details , refer to “ Warning chimes and warning indicator of the keyless access with push-button start system ” F3-24 .
– CONTINUED –