2-10
Keys and doors / Keyless access with push-button start system
& Unlock using PIN Code Access
S02AP21
When all doors including the rear gate are locked , you can unlock the doors ( including rear gate ) without a key by pressing the rear lock button .
1 ) Rear lock button
NOTE
PIN Code Access will be helpful if the key fob is accidentally left in the vehicle . It is recommended that a 5- digit security code ( PIN code ) be registered .
! Preparation for registering a PIN code
S02AP2101
1 . Turn off the ignition switch . 2 . Close all doors ( including rear gate ).
3 . Press and hold the “ ” button on the access key fob . Then all doors ( including rear gate ) will be locked .
4 . Keep the “ ” button pressed , and press the rear lock button within 5 seconds after step 3 .
5 . Press and hold the rear lock button for more than 5 seconds . Confirm a chirp sound .
6 . Release the “ ” button and rear lock button .
7 . Press the “ ” button on the access key fob while the chirp sounds .
Then the chirp will stop and the preparation is complete .
NOTE
Press the “ ” button within 30 seconds of step 6 to end the preparation mode and move on to the registration stage . Unless the “ ” button is pressed within 30 seconds after step 6 , the PIN code registration will be canceled .
! Registration for a PIN code
S02AP2102
For example , to register “ 32468 ” as the PIN code , perform the following procedure .
1 . Press the rear lock button three times .
2 . After a chirp sounds once , press the rear lock button twice .
3 . After a chirp sounds once , press the rear lock button four times .
4 . After a chirp ( ding ) sounds once , press the rear lock button six times .
5 . After a chirp ( ding ) sounds once , press the rear lock button eight times .
6 . Perform steps 1 to 5 again within approximately 30 seconds after the chirp starts sounding intermittently .
7 . All doors will be unlocked and locked . Then the PIN code will be registered .
NOTE
. Press the rear lock button ten times to enter “ 0 ”. . Change the PIN code frequently to protect your vehicle from theft . . If you have lent your vehicle to another person , confirm that the PIN code has not been changed or deleted . If the PIN code has been changed or deleted , reregister a new PIN code . . If you make an error during the registration procedure , press the “ ”