2-2
Keys and doors / Keys
Keys
S02AA
NOTE
For models with “ keyless access with push-button start system ”, refer to “ Keyless access with push-button start system ” F2-2 .
The following keys are provided with the vehicle .
NOTE
Locking / unlocking using the remote keyless entry system can also be controlled with the buttons on the key . For detailed information , refer to “ Remote keyless entry system ” F2-17 .
CAUTION
Do not attach a large key holder or key case to either key . If it bangs against your knees while you are driving , it could turn the ignition switch from the “ ON ” position to the “ ACC ” or “ LOCK ” position , thereby stopping the engine .
Keyless access with pushbutton start system ( if equipped )
S02AP
The following access key fobs are provided with the vehicle .
1 ) |
Master key |
2 ) |
Sub key |
3 ) |
Key number plate |
A key can be used in the following locations .
. Ignition switch . Driver ’ s door . Glove box
& Key number plate
S02AA01
The key number is stamped on the key number plate attached to the key set . Write down the key number and keep it in another safe place , not in the vehicle . This number is needed to make a replacement key if you lose your key or lock it inside the vehicle . Refer to “ Key replacement ” F2- 15 .
1 ) |
Access key fob |
2 ) |
Key number plate |
The keyless access with push-button start system allows you to perform the following functions when you are carrying the access key fob .
. Locking and unlocking of the doors and rear gate . Refer to “ Locking and unlocking by holding the access key fob ” F2-6 .
. Starting and stopping the engine . For detailed information , refer to “ Starting and stopping engine ( models with push-button