About EyeSight
In left-hand drive vehicles, EyeSight is configured for driving on the
right-hand side of the road. However, it can be reconfigured by changing
the Driving Lane Customize setting for driving on the left-hand
side.*
� Page 124
If the setting for the traffic lane (driving side of the road) does not
match the traffic lane, full EyeSight performance may not be available.
*: Characteristics and settings that are affected by specific differences
between right-hand drive and left-hand drive vehicles cannot be
changed.
• The system may not operate correctly under the conditions listed below.
When these conditions occur, turn off the Pre-Collision Braking System. Also,
do not use Adaptive Cruise Control, Lane Centering Function, Lane Departure
Prevention Function or Conventional Cruise Control.
- The tire pressure is not correct. *1
- The temporary spare tire is installed. *1
- Tires that are unevenly worn or tires with uneven wear patterns are
installed. *1
- Tires that are the wrong size are installed. *1
- A flat tire has been fixed temporarily with a tire repair kit.
- The suspension has been modified (including a genuine SUBARU suspension
that has been modified).
- An object that obstructs the stereo camera’s view is installed on the vehicle.
- The headlights are dirty or they have snow and ice or dirt on them. (Objects
are not correctly illuminated and are difficult to detect.)
- The optical axes are not aligned correctly. (Objects are not correctly illuminated
and are difficult to detect.)
- The lights including headlights and fog lights have been modified.
- Vehicle operation has become unstable due to an accident or malfunction.
- The brake system warning light is illuminated in red. *2
- A heavy cargo is loaded onto or inside the vehicle.
- The maximum number of occupants is exceeded.
- The combination meter is not operating properly; such as when the lights do
not illuminate, the beeps do not sound, the display is different from when it
is normal, etc. *3
• The system will not operate correctly in the following conditions. Do not use
Adaptive Cruise Control, Lane Centering Function, Lane Departure Prevention
Function or Conventional Cruise Control.
- The wheels are out of balance (e.g., the balance weight is removed or misaligned).
*1
- The wheels are out of alignment. *1
- A trailer or another vehicle, etc. is being towed.
Continued on next page �
5