Advanced Adaptive Cruise Control
� Continued from previous page
• The stereo camera may have difficulty detecting the following objects or conditions.
Operate the brake pedal and take other actions as necessary.
- Vehicles at significantly different speeds (vehicles driving slowly, stopped or
oncoming vehicles, etc.)
- Vehicles cutting into your lane
- Motorcycles, bicycles, pedestrians and animals, etc.
- Light is poor in the evening or early morning.
- At night or in a tunnel without the headlights on
- At night or in a tunnel when there is a vehicle in front that does not have its
taillights on
- Strong light is coming from the front (sunlight or headlight high beams, etc.).
- Vehicles in front that have a
rear aspect that is low, small
or irregular (the system may
recognize another part of the
vehicle and will determine
operation from that)
• An empty truck or trailer
that has no tailgate or
longbed
• Vehicles that have cargo
protruding from their back
ends
S02133
• Non-standard shaped vehicles
(vehicle transporters or vehicles with a sidecar fitted, etc.)
• Vehicles that are low
- Objects that are located close to the bumper of your vehicle
• When you do not want to use Adaptive Cruise Control, be sure to turn the
(CRUISE) switch off. If the switch is left on, cruise control may be accidentally
engaged, possibly resulting in an accident.
• Before using Adaptive Cruise Control, be sure to fully verify the safety of the
vehicle occupants and the area around the vehicle. Never operate the cruise
control from outside the vehicle.
Detection of the vehicle in front by the EyeSight stereo camera*
• Under the following road conditions or conditions of your vehicle, detection of
the vehicle in front may not be possible. Vehicles in neighboring traffic lanes
or roadside objects may also be incorrectly detected. Under conditions such
as these, do not use Adaptive Cruise Control. If cruise control is currently in
use, operate the brake pedal and take other actions as necessary.
46