Customizing functions
●Cruise Control Acceleration Characteristics
The Cruise Control Acceleration Characteristics of the Adaptive Cruise Control and Conventional
Cruise Control system can be set to one of four levels.
Lv. 4 (Dynamic): Mode used when powerful acceleration is required.
Lv. 3 (Standard): Mode that focuses on quick response acceleration and deceleration.
Lv. 2 (Comfort): Mode that focuses on driving with smooth movement.
Lv. 1 (Eco): Mode that focuses on driving with smooth movement and optimum fuel
economy.
●Lane Centering
The Lane Centering Function setting can be activated (On) or deactivated (Off).
NOTE
When Lane Centering Function is turned off by the customizing functions, push
the (Lane Keep Assist) switch to activate the Lane Departure Prevention
Function. In this scenario, the Adaptive Cruise Control setting does not affect the
Lane Departure Prevention Function.
●Select Drive on Left/Drive on Right (Driving Lane Customize)
It is possible to switch between driving on the left-hand side of the road and driving on the
right-hand side.
The Adaptive Cruise Control (� page 42) function is adapted to the set traffic lane direction.
WARNING
If the Driving Lane Customize setting does not match the flow of traffic, full
EyeSight performance may not be available.
●Canceling the custom functions
In the following cases, the custom functions will be canceled and the change settings
screen will be displayed.
• The (Info)/SET switch is pulled and held.
• The engine is turned off.
• The switch is not operated for approximately 30 seconds.
124