Conventional Cruise Control
■ Restoring the previously set vehicle speed
The previously set vehicle speed is stored in memory. To restore that vehicle speed, press
the RES/SET switch to the “RES/+” side. (Conventional Cruise Control indicator)
changes from white to green.
You can restore the set vehicle speed when the previously set vehicle speed has been
stored and the current vehicle speed is approximately 20 mph (30 km/h) or more.
Green
S03395
S03180
NOTE
• The vehicle speed stored in memory is erased in the following circumstances:
- The cruise control is turned off by pressing the (CRUISE) switch.
- The Vehicle Dynamics Control or the Traction Control Function is activated.
- The cruise control mode was switched from Conventional Cruise Control to
Adaptive Cruise Control.
• The vehicle drives constantly and correspondingly to the set vehicle speed
between 20 mph (30 km/h) and 90 mph (145 km/h).
• If there is no vehicle speed stored in memory (previous vehicle speed), the
current vehicle speed is set when the RES/SET switch is pressed to the
“RES/+” side.
� Page 107
114