Conventional Cruise Control
(2) Switch to Conventional Cruise Control.
Press and hold the / (Following distance setting) switch for approximately 2
seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise Control.
A notification sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and (Conventional Cruise Control indicator)
(white) is displayed.
Conventional
Cruise
Control
indicator
(white)
S03397
S03154
To set the ready status:
Conventional Cruise Control can be activated
when all of the following conditions
are met and (READY indicator) is
displayed on the EyeSight display area.
- All doors (except the rear gate) are
closed.
- The driver’s seatbelt is fastened.
- The select lever is in the D or M
READY
indicator
(models with manual mode) position.
- The brake pedal is not depressed.
- The road is not on a steep slope.
- The steering wheel has not been turned significantly in either direction.
- The X-MODE is not turned on (the X-MODE indicator goes off).
S02711
- The vehicle speed is between approximately 20 mph (30 km/h) and 90 mph (145
km/h).
- Parking brake is released.
106