In case of emergency / Access key fob – if access key fob does not operate properly 9-17 locked.
. Remember that the brake booster and power steering do not function when the engine is not running. Because the engine is turned off, it will take greater effort to operate the brake pedal and steering wheel.
CAUTION
. If transmission failure occurs, transport your vehicle on a flatbed truck.
. For CVT models, the traveling speed must be limited to less than 20 mph( 32 km / h) and the traveling distance to less than 31 miles( 50 km). For greater speeds and distances, transport your vehicle on a flat-bed truck.
Access key fob – if access key fob does not operate properly
CAUTION
S09AP
Keep metallic objects, magnetic sources and signal transmitters away from the area between the access key fob and the push-button ignition switch. They may interfere with the communication between the access key fob and the pushbutton ignition switch.
The following functions may be inoperable because of strong radio signals in the surrounding area or a low battery condition of the access key fob.
. Locking / unlocking doors( including the rear gate)
. Switching power status. Starting engine
In such cases, perform the following procedure. When the battery of the access key fob is discharged, replace it with a new one. Refer to“ Replacing battery of access key fob” ☞11-44.
& Locking and unlocking
1) |
Release button |
2) |
Emergency key |
S09AP01
While pressing the release button of the access key fob, take out the emergency key.
Lock or unlock the driver’ s door with the emergency key in the procedure described in“ Locking and unlocking from the outside” ☞2-21.
NOTE
After locking or unlocking, be sure to attach the emergency key back to the access key fob.
– CONTINUED –