In case of emergency / Flat tires 9-5
Jack-up points
6. Place the jack under the side sill at the front or rear jack-up point closest to the tire that you are going to replace.
Turn the jackscrew by hand until the jack head engages firmly into the jack-up point.
7. Insert the jack handle into the jackscrew, and turn the handle until the tire clears the ground. Do not raise the vehicle higher than necessary.
Flat tires
S09AC
If you have a flat tire while driving, never brake suddenly; keep driving straight ahead while gradually reducing speed. Then slowly pull off the road to a safe place.
& Changing a flat tire WARNING
S09AC01
. Use only the jack provided with your vehicle. The jack supplied with the vehicle is designed only for changing a tire. Never get under the vehicle while supporting the vehicle with this jack.
. Do not jack up the vehicle on an incline or a loose road surface. The jack can come out of the jacking point or sink into the ground and this can result in a severe accident.
. Always turn off the engine before raising the flat tire off the ground using the jack. Never swing or push the vehicle supported with the jack. The jack can come out of the jacking point due to a jolt and this can result in a severe acci-
– CONTINUED –