7-50
Starting and operating/Cruise control
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
S07AQ02
The cruise control can be temporarily
canceled in the following ways.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
For CVT models, you can cancel the
cruise control by shifting the select
lever into the “N” position. However,
do not shift the lever into the “N”
position while driving except in case
of emergency. If the select lever is
shifted into the “N” position, the
engine brake will no longer work.
This could result in an accident.
The cruise control set indicator light in the
combination meter turns off when the
cruise control is canceled.
Cruise control set indicator light (type B)
1) When setting the displayed unit as
“MPH”.
2) When setting the displayed unit as
“km/h”.
At this time, the cruise control set indicator
light is illuminated in the combination
meter. The set speed will be shown on
the combination meter. You can change
the displayed unit by operating the combi-
nation meter display.
. For type A meter details, refer to
“Combination meter settings” F3-11.
. For type B meter details, refer to
“Screen Settings” F3-38.
WARNING
. Press the “CANCEL” button.
. Press the X-MODE switch to activate
the X-MODE (models with X-MODE).
. Depress the brake pedal.
. Depress the clutch pedal (MT models
only).
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 20 mph (30
km/h) or more, press the “RES/SET”