Starting and operating / Hill start assist system 7-47
& To activate / deactivate the Hill start assist system
S07AU02
place the ignition switch in the“ LOCK”/“ OFF” position once and then start over again.
! To deactivate
S07AU0201
1. Park your vehicle in a flat and safe location and apply the parking brake.
2. Turn the ignition switch to the“ LOCK”/“ OFF” position.
3. Restart the engine.
Hill start assist OFF indicator
CAUTION
When starting on an up hill grade, make sure the Hill start assist OFF indicator light is off.
If the Hill start assist OFF indicator light is on, make sure the parking brake is applied.
To activate or deactivate the Hill start assist system, perform the following steps.
NOTE
If you make an error when performing any steps in the following procedure,
4. Confirm the following items.( 1) The brake system warning light illuminates.( 2) The Vehicle Dynamics Control warning light turns off.( 3) The Vehicle Dynamics Control OFF indicator light turns off.( 4) The ABS warning light turns off.
5. Press and hold the Vehicle Dynamics Control OFF switch for 30 seconds until the Vehicle Dynamics Control OFF indicator light on the combination meter turns on and off.
6. Within 5 seconds, release the Vehicle Dynamics Control OFF switch.
7. Within 2 seconds, press back the Vehicle Dynamics Control OFF switch.
The Hill start assist OFF indicator light turns on and off.
8. Turn the ignition switch to the“ LOCK”/“ OFF” position. Hill start assist is deactivated.
NOTE
When the Hill start assist system is deactivated, the Hill start assist OFF
– CONTINUED –