7-30
Starting and operating / Power steering
3. Remove the grip portion of the screwdriver.
4. While depressing the brake pedal, insert a screwdriver into the hole, move it right and left while pushing the shift lock release button using a screwdriver, and then move the select lever.
If the select lever does not move after performing the above procedure, the shift lock system may be malfunctioning. Contact a SUBARU dealer for an inspection as soon as possible.
& Driving tips
S07BG05
CAUTION
If the accelerator and brake pedals are depressed at the same time, driving torque may be restrained. This is not a malfunction.
. Always apply the foot or parking brake when the vehicle is stopped in the“ D” or“ R” position.
. Always apply the parking brake when parking your vehicle. Do not hold the vehicle with only the mechanical friction of the transmission.
. Do not keep the vehicle in a stationary position on an uphill grade by using the“ D” position. Use the brake instead.
. The engine may, on rare occasions, knock when the vehicle rapidly accelerates or rapidly pulls away from a standstill. This phenomenon does not indicate a malfunction.
Power steering
S07AJ
& Power steering warning light
S07AJ10
& Power steering system features
S07AJ11
The vehicle is equipped with an electric power steering system. When the ignition switch is turned to the“ ON” position, the power steering warning light on the combination meter illuminates to inform the driver that the warning system is functioning properly. Then, if the engine started, the warning light turns off to inform the driver that the steering power assist is operational.