Starting and operating / Remote engine start system( dealer option) 7-15
mote engine start system.
NOTE
. The length of time for which it is acceptable to allow the engine to remain idling may be bound by local laws and regulations. Check the local rules when using the remote engine start system.. When taking your vehicle in for service, it is recommended that you inform the service personnel that your vehicle is equipped with a remote engine start system.
& Remote engine starter transceiver( fob)
S07AZ21
1) Fob button
! Starting the engine
S07AZ2101
NOTE
All vehicle doors( including rear gate) and the engine hood must be closed prior to activating the remote engine start system. Any open entry point will prevent starting or cause the engine to stop.
The remote engine start system is activated by pressing the fob button on your remote engine starter transceiver( fob) twice within 3 seconds. If the fob is within operating range of the system and the start request is received, the following phenomena will occur.
. The fob flashes and beeps once.. The horn sounds once.
. The side marker lights, tail lights, and parking lights flash once.
If the fob is not within range( the user is too far away from the vehicle), the fob will indicate two long flashes without beeping.
The system will check certain safety preconditions before starting, and if all conditions are met, the engine will start within 5 seconds. After the engine starts, the following phenomena will occur.
. The fob flashes and beeps twice.. The horn sounds once.
. The side marker lights, tail lights, and parking lights flash once.
While the engine is idling via the remote engine start system, the following phenomena will occur.
. The side marker lights, tail lights, and parking lights remain illuminated.
. The fob button flashes once every 3 seconds.
. The power windows are disabled.
If the engine turns over but does not start( or starts and stalls) the remote engine start system will power off and then attempt to start the engine 3 additional times. The system will not attempt to restart the engine if it determines a vehicle malfunction is preventing starting. If the engine does not start after 3 additional attempts, the remote engine start request will be aborted.
! Stopping the engine
S07AZ2102
Press and hold the fob button for at least 2 seconds to stop the engine. The fob will flash and beep three times, indicating the engine has stopped. If the stop request is not received( for example, if the user is too far away from the vehicle), the fob will continue to flash once every 3 seconds. The system will automatically stop the engine after 15 minutes.
– CONTINUED –