Starting and operating / Starting and stopping engine( models with push-button start system) 7-11
( 4) If the engine still refuses to start, contact your nearest SUBARU dealer for assistance.
6. Confirm that all warning and indicator lights have turned off after the engine has started. The fuel injection system automatically lowers the idle speed as the engine warms up.
While the engine is warming up, make sure that the select lever is at the“ P” or“ N” position and that the parking brake is applied.
CAUTION
If you restart the engine while the vehicle is moving, shift the select lever into the“ N” position. Do not attempt to place the select lever of a moving vehicle into the“ P” position.
& Stopping the engine
S07BD02
The ignition switch should be turned off only when the vehicle is stopped and the engine is idling.
WARNING
Do not stop the engine when the vehicle is moving. This will cause loss of power to the power steering and the brake booster, making steering and braking more difficult. It could also result in accidental activation of the“ LOCK”/“ OFF” position on the ignition switch, causing the steering wheel to lock.
Starting and stopping engine( models with push-button start system)
& Safety precautions
Refer to“ Safety precautions” ☞2-3.
S07BE
S07BE06
& Operating range for pushbutton start system
S07BE01
Refer to“ Operating range for push-button start system” ☞3-6.
& Starting engine WARNING
S07BE03
. There are some general precautions when starting the engine. Carefully read the precautions described in“ Starting engine” ☞7-9.
. If the indicator on the push-button ignition switch flashes in green after the engine has started, never drive the vehicle. The steering is still locked, and it may result in an accident.
– CONTINUED –