Instruments and controls / Steering Responsive Headlight( SRH) 3-69
– When the headlights of an oncoming vehicle or the tail lights of a vehicle ahead illuminate on only one side. – When the oncoming vehicle or vehicle ahead is a motorcycle. – Conditions of a road( slope, curve, road surface, etc.). – Number of passengers and weight of loaded cargo. – Limitation of the detection ability of the stereo camera.
& Daytime running light system
S03AH04
WARNING
When the daytime running lights are illuminated, the tail lights do not illuminate. When it becomes dark outside, turn the light switch to the“” position to illuminate the headlights and tail lights. This will improve visibility and allow other drivers to see your vehicle more easily.
The daytime running lights will automatically illuminate when the following conditions are fulfilled.
. The engine is running.. The parking brake is fully released.
. The light control switch is in the“ AUTO”( if equipped),“” or off position.
. For CVT models, the select lever is in a position other than the“ P” position.
NOTE
When the light switch is in the“” position, the instrument panel illumination, front side marker lights, tail lights and license plate lights are also illuminated.
Steering Responsive Headlight( SRH)( if equipped)
S03BL
1) The target area of illumination when SRH is activated
2) The target area of illumination when SRH is not activated
SRH is a function that automatically moves the headlight beam to the left or right in accordance with the steering angle and vehicle speed. This function helps to improve the visibility at night by illuminating the road ahead at corners and intersections.
– CONTINUED –