Subaru Crosstrek Manuals 2019 Crosstrek Owner's Manual | Page 119

2-12 Keys and doors/Keyless access with push-button start system the remote keyless entry system – Lock or unlock the doors by using the power door locking switch – Open either of the front doors & Power saving function of ac- cess key fob and push-button start system will not be available. To cancel the power save mode, press one of the buttons on the access key fob. . To start the engine while the func- tions are disabled, perform the proce- dure described in “Starting engine” F9-18. & Disabling keyless access function ! Disabling functions S02AP22 This function stops the access key fob from receiving signals and helps minimize the battery consumption of the access key fob. 1. Press the “ ” button twice while hold- ing the “ ” button. 1) LED indicator 2. Confirm that the LED indicator blinks 4 times to notify that the setting is complete. When the access key fob is in the power save mode, the keyless access function S02AP07 WARNING If you wear an implanted pacemaker or an implanted defibrillator, per- form the procedure described in “By operating the driver’s door” F2-13 to disable the keyless access function. If you perform the proce- dure described in “By operating the access key fob” F2-12, the opera- tion of an implanted pacemaker or implanted defibrillator may be af- fected by the radio waves from the transmitter antenna. S02AP0701 ! By operating the access key fob S02AP070102 If you have registered a PIN code for PIN Code Access, you can disable the keyless access function by operating the access key fob. For details about registering a PIN code, refer to “Preparation for registering a PIN code” F2-10. 1. Open the driver’s door. 2. Rotate the lock lever toward the lock position. When the vehicle is not going to be used for a long time, or when you choose not to use the keyless access function, the key- less access function can be disabled. NOTE . The locking and unlocking function by the remote keyless entry system is not disabled. 3. Press and hold the “ ” button and “ ” button on the access key fob simulta-