Subaru Crosstrek Manuals 2018 Crosstrek Owner's Manual | Page 62

1-30 Seat, seatbelt and SRS airbags/Child restraint systems ! Installing forward facing child re- straint WARNING Before installing a child restraint system, be sure to confirm that the seatback is securely locked into place. Otherwise, in an accident, serious injury or death could result. 1. Shake the seatback slightly to confirm that it is securely locked into place. – Check the red colored unlocking marker which is attached to the bottom of the lock release knob is invisible. For details, refer to “Folding down the rear seatback” F1-6. 2. Prepare the rear seat head restraint where a child restraint system is intended to be installed in the following way. – When a child restraint system is installed on the window-side seating position, remove the rear seat head restraint. For details, refer to “Rear seats” F1-9. Store the head restraint in the cargo area. Avoid placing the head restraint in the passenger compartment to pre- vent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn. – When a child restraint system is installed on the rear center seating position, raise the rear seat head restraint to the extended position. Do not remove the head restraint. For details, refer to “Rear seats” F1-9. 3. Place the child restraint system in the rear seating position. WARNING When you intend to install a child restraint system on the rear center seating position, if the child restraint system does not fit snugly against the contours of the rear center seat cushion, install the child restraint system on the window-side seating position to be safe. For details, refer to “Where to place a child restraint system” F1-26. 4. Run the lap and shoulder belt through or around the child restraint system follow- ing the instructions provided by its manu- facturer. – When a child restraint system is installed on the rear center seating position, pass the rear center seatbelt through the belt guide properly. For details, refer to “Rear center seatbelt” F1-17. 5. Insert the tongue plate into the buckle until you hear a click.