11-40 Maintenance and service/Replacing bulbs
& Backup light
4. Install the bulb socket by turning it
clockwise.
5. Install the light cover on the rear gate.
& License plate light
1. Apply a flat-head screwdriver to the
light cover as shown in the illustration, and
pry the light cover off from the rear gate
trim.
2. For left side light, turn the bulb socket
clockwise and remove it.
For right side light, turn the bulb socket
counterclockwise and remove it.
1. The license plate lights must be
pushed outwards, and then pulled out to
be removed.
3. Pull the bulb out of the bulb socket and
replace it with a new one.