Seat, seatbelt and SRS airbags/Seats
! Angle adjustment
! Rear seats
Both the rear window side seats and the
rear center seat are equipped with head
restraints.
! Rear windows side seating posi-
tion
The angle of the head restraint can be
adjusted in several steps. While maintain-
ing a suitable driving posture, adjust the
head restraint to a position where the back
of your head is as close to the head
restraint as possible.
To tilt:
Tilt the head restraint by hand to the
preferred position. A click will be audible
when the head restraint is locked.
To return:
Tilt the head restraint once as far forward
as it can go. The head restraint will
automatically return to the fully upright
position. Then, adjust the head restraint
again to the preferred angle.
1)
2)
1-9
After installing the head restraint, make
sure it is securely locked.
! Rear center seating position
CAUTION
The head restraint is not intended to
be used at the retracted position.
Before sitting on the seat, raise the
head restraint to the extended posi-
tion.
Head restraint
Release button
To remove:
While pressing the release button, pull out
the head restraint.
To install:
Install the head restraint into the holes that
are located on the top of the seatback until
the head restraint locks. Press and hold
the release button to lower the head
restraint.
1)
2)
Incorrect (retracted position)
Correct (extended position)
– CONTINUED –