4-8
Climate control/Manual climate control operation
foot outlets and both side outlets of the
instrument panel (Refer to “Defrosting”
F4-10.)
maximum speed.
. The air inlet will be set to recirculation.
. The air flow mode setting will be set to
ventilation mode.
To turn off MAX A/C mode and return the
previous setting, press the MAX A/C
button again.
& Temperature control
Turn the temperature control dial to set the
preferred interior temperature.
Heat: Foot outlets, both side outlets of the
instrument panel and some through wind-
shield defroster outlets (A small amount of
air flows to the windshield and both side
windows to prevent fogging.)
NOTE
Defrost: Windshield defroster outlets and
both side outlets of the instrument panel
(Refer to “Defrosting” F4-10.)
& MAX A/C mode (for type B and
C)
Heat-def: Windshield defroster outlets,
For quicker cooling, press the MAX A/C
button.
When the MAX A/C mode is on, the
following settings will be changed auto-
matically.
. The air conditioner will turn on.
. The temperature will be set on the
lowest.
. The fan speed will be set on the
The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
! SYNC mode (type C)
When the SYNC mode is turned on, both
the driver’s and passenger’s side tem-
peratures are synchronized using the
driver’s side temperature control dial.
Press the SYNC button to turn on the
SYNC mode. The SYNC button indicator
will illuminate.
Press the SYNC button again or turn the
passenger’s side temperature control dial
to cancel the SYNC mode. The SYNC
button indicator will not illuminate. In this
case, temperature control on the driver’s
side and passenger’s side is separated.