3-66
Instruments and controls/Light control switch
& Setting the clock automati-
cally
1. Press the
button.
2. Select “Settings”.
3. Select “Vehicle”.
4. Select “Clock adjustment” and then
select “Auto”.
button again to complete
5. Press the
the setting.
! Models with navigation system
The clock will be set automatically where a
GPS signal is available.
! Models without navigation system
The clock will be set and adjusted auto-
matically when a smartphone is connected
via Bluetooth ® for transferring phonebook
data.
1. Register the smartphone to the audio
system. For details, refer to “Bluetooth
SETTINGS” in the supplemental Owner’s
Manual for the audio/navigation system.
2. Transfer phonebook data to the sys-
tem. For details, refer to “Bluetooth SET-
TINGS” in the supplemental Owner’s
Manual for the audio/navigation system.
The clock will be adjusted automatically.
NOTE
Depending on the model of smart-
phone, the settings of the connected
smartphone may need to be changed.
(ex: For iOS or other models, notifica-
tion settings may need to be activated.)
For details, check the instructions on
connecting smartphones.
& Regulatory information
The Bluetooth ® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc.
Light control switch
& Precautions and tips
CAUTION
. Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
. Before leaving the vehicle, make
sure that the lights are turned off.
If the vehicle is left unattended
for a long time with the lights
illuminated, the battery may be
discharged.
NOTE
. Even if the key is removed from the
ignition switch, the lights can be illumi-
nated by operating the light control
switch from the “ ” (off) position to the
“
” or “ ” position.
. If the driver’s door is opened while
the lights are illuminated and the key is
removed from the ignition switch, the
chirp sound will inform the driver that
the lights are illuminated.