Instruments and controls/Clock
Clock
For models with a SUBARU genuine
navigation and/or audio system, the clock
can be adjusted using either auto mode or
manual mode.
. Auto mode: automatic clock adjustment
. Manual mode: manual clock adjust-
ment
4. Select “Vehicle”.
5. Select “Clock adjustment” and then
select “Manual”.
& Setting the clock manually
! Type A multi-function display (black
and white)
1. Turn the ignition switch to “ON”.
6. Press the “+” button or the “−” button
beside the clock.
3-63
! Setting 12-hour or 24-hour dis-
play
The clock can be set to 12-hour or 24-hour
display. Perform the following procedure to
switch the display format.
1. Turn the ignition switch in the “LOCK”/
“OFF” position.
2. Press and hold the “−” button located
near the clock display for approximately 5
seconds. The clock display will then start
to flash.
3. While the clock display is flashing,
press and hold the “+” button for approxi-
mately 2 seconds. The clock format will
then change.
4. The clock display will continue to flash
for approximately 3 seconds to indicate
that the clock display has been changed.
2. Press the
button.
3. Select “Settings”.
– CONTINUED –