Subaru Crosstrek Manuals 2018 Crosstrek Owner's Manual | Page 104

2-2 Keys and doors/Keys Keys NOTE For models with “keyless access with push-button start system”, refer to “Keyless access with push-button start system” F2-2. The following keys are provided with the vehicle. . Glove box NOTE Locking/unlocking using the remote keyless entry system can also be con- trolled with the buttons on the key. For detailed information, refer to “Remote keyless entry system” F2-17. Keyless access with push- button start system (if equipped) The following access key fobs are pro- vided with the vehicle. CAUTION Do not attach a large key holder or key case to either key. If it bangs against your knees while you are driving, it could turn the ignition switch from the “ON” position to the “ACC” or “LOCK” position, thereby stopping the engine. & Key number plate 1) 2) 3) 4) Master key (Main) Master key (Sub) Sub key Key number plate A key can be used in the following locations. . Ignition switch . Driver’s door The key number is stamped on the key number plate attached to the key set. Write down the key number and keep it in another safe place, not in the vehicle. This number is needed to make a replacement key if you lose your key or lock it inside the vehicle. Refer to “Key replacement” F2- 15. 1) 2) 3) Access key fob (main) Access key fob (sub) Key number plate The keyless access with push-button start system allows you to perform the following functions when you are carrying the access key fob. . Locking and unlocking of the doors and rear gate. Refer to “Locking and unlocking by holding the access key fob” F2-6. . Starting and stopping the engine. For detailed information, refer to “Starting and