Customizing functions
Customizing functions
The following settings can be changed on the combination meter display.
Item
Warning Volume
Warning Volume
Setting Default setting
Max/Mid/Min Mid
Lead Vehicle Acquisition Sound ON/OFF ON
Lead Vehicle Moving Monitor Function ON/OFF ON
Lv. 1 (Eco)/
Lv. 2 (Comfort)/
Lv. 3 (Standard)/
Lv. 4 (Dynamic) Lv. 3
(Standard)
EyeSight
Cruise Control Acceleration
Characteristics
NOTE
The following settings can be restored to the factory (default) settings.
Refer to the Owner’s Manual for your vehicle.
■ How to customize
Operations can be performed when the select
lever is in the P position and the ignition
switch is in the ON position while the vehicle
is parked. However, the Cruise Control Accel-
eration Characteristics and warning volume
can be changed, even while you are driving.
(1) Pull the
/
switch toward you to
display the “Change settings” screen.
Pull and hold the
(Info)/SET switch to
change to the settings screen.
(2) Pull the
/
switch toward you, select
“EyeSight”, and pull the
(Info)/SET
switch to confirm.
The system will then switch to the
EyeSight settings screen.
Operate the following switches according to
the display on the screen.
x Select:
(Return) switch/
(Send) switch
x Confirm:
(Info)/SET switch
Change settings
Settings screen
Setting
Screen Setting
A
Select
Enter
Select
S02421
91