Conventional Cruise Control
■ Resuming a vehicle speed that was previously stored
A vehicle speed that has been previously set is stored in memory * . To recall and set that
vehicle speed, press the RES/SET switch to the “RES/+”. (The EyeSight display area shows
the set condition again.)
Resume is possible when a vehicle speed was previously set, and the current vehicle speed
is approximately 20 MPH (30 km/h) or more.
(Green)
S02655
NOTE
* The vehicle speed stored in memory is erased in the following circum-
stances:
- The cruise control is turned off by pressing the
(CRUISE) switch.
- Either vehicle Dynamics Control or Traction Control Function has been
activated.
- The cruise control mode was switched from Conventional Cruise Control
to Adaptive Cruise Control.
x The vehicle drives constantly and correspondingly to the set vehicle speed
between 20 MPH (30 km/h) and 90 MPH (145 km/h).
x If there is no vehicle speed in the memory (a previously set vehicle speed),
press the RES/+ switch to set the vehicle speed (20 MPH (30 km/h) to 90
MPH (145 km/h)).
84
S02414