Adaptive Cruise Control
How to use Adaptive Cruise Control
Adaptive Cruise Control is available when the engine is turned on.
■ Setting Adaptive Cruise Control
( 1) Setting Adaptive Cruise Control to standby status Press the( CRUISE) switch. At this time,“”( Adaptive Cruise Control), your vehicle indicator and the following distance setting indicator are displayed on the EyeSight display area in the combination meter display. The set vehicle speed display will read“-- MPH”.
S02390
S02391
If the switch is pressed once more, the EyeSight display will turn off. It will also automatically turn off when the engine is stopped. To set ready status: Adaptive Cruise Control can be set when all of the following conditions are met and is displayed on the EyeSight display area.- All doors( except the rear gate / trunk) are closed.- The driver’ s seatbelt is fastened.- The select lever is in the D or M position.- The brake pedal is not depressed.- EyeSight operation is not temporarily stopped.
� Refer to page 89.- The road is not a steep slope.
READY indicator
S02709
- |
The steering wheel has not been turned significantly in either direction. |
- |
X-mode is not turned on( the X-mode indicator light |
goes off). |
- |
The vehicle speed is between approximately 0 MPH( 0 km / h) and 90 MPH( 145 km / h). |
- |
Parking brake is released. |
40