About EyeSight
■
(CRUISE) switch
x Switches cruise control * on/off.
x When the
(CRUISE) switch is pressed, “
” appears on the EyeSight display
area in the combination meter display, and then
appears by pressing and holding
the
/
(following distance setting) switch for approximately 2 seconds. When
“
” or “
” is shown on the EyeSight display, this indicates that the main cruise
control is on.
Refer to pages 40 and 76.
x This switch can be used to cancel the cruise control.
Refer to pages 48 and 81.
* Adaptive Cruise Control and Conventional Cruise Control
■ RES/SET switch
● SET/-
x This switch can be used to set cruise control * .
x This switch can be used to reduce the set vehicle speed (when cruise control * is currently
set).
Refer to pages 41 and 45 (for Adaptive Cruise Control).
Refer to pages 78 and 80 (for Conventional Cruise Control).
* Adaptive Cruise Control and Conventional Cruise Control
● RES/+
x This switch can be used to set cruise control*.
x After cruise control * is canceled, this switch can be used to resume the cruise control
function at the vehicle speed that was previously set.
x This switch can be used to increase set vehicle speed (when cruise control * is currently
set).
Refer to pages 44 and 51 (for Adaptive Cruise Control).
Refer to page 84 (for Conventional Cruise Control).
* Adaptive Cruise Control and Conventional Cruise Control
■
/
(Following distance setting) switch
x This switch can be used to switch the set following distance in 4 stages: (only when Adap-
tive Cruise Control is on).
Refer to page 47.
x When the
(CRUISE) switch is on, switching between Adaptive Cruise Control and
Conventional Cruise Control is possible by pressing the
/
(Following distance
setting) switch*.
* To switch to Conventional Cruise Control, press and hold the switch for approximately 2
seconds or longer.
■
(Lane Keep Assist) switch
Switches Lane Keep Assist on/off.
Refer to page 58.
18