Subaru Crosstrek Manuals 2017 Crosstrek Owner's Manual | Page 236

3-98 Instruments and controls/Wiper and washer & Rear window wiper and washer switch Windshield washer fluid warning light (type B) The windshield washer fluid warning light illuminates when the washer fluid level in the tank has dropped to the lower limit. If the warning light illuminates, refill the tank with fluid. For the refilling procedure, refer to “Windshield washer fluid” F11-28. (accompanied by wiper op: Washer eration) : Continuous : Intermittent : Off Washer (accompanied by wiper op: eration) ! Rear wiper To turn the rear wiper on, turn the knob switch upward. To turn the wiper off, return the knob switch to the “ ” position. ” posiWith the switch turned to the “ tion, the rear wiper will operate intermittently at intervals corresponding to the vehicle speed. In this position, when you move the select lever to the “R” position (CVT models) or the shift lever to the reverse position (MT models), the rear wiper will switch to continuous operation. When you move the select lever/shift lever from the “R” (reverse) position to another position, the rear wiper will return to intermittent operation. Reverse gear interlocked rear wiper: Even if the rear wiper switch is in the off “ ” position, if the front windshield wiper is operating continuously, the rear wiper will operate intermittently when you move the select lever/shift lever to the “R” (reverse) position. The factory setting (default setting) of the reverse gear interlocked rear wiper is as follows. . U.S.-spec. models: Non-operational . Other models: Operational