Keys and doors/Keyless access with push–button start system
side) of the power door locking switch
twice while the door is open.
7. Within 10 seconds after step 6 is
performed, close and open the driver’s
door once.
8. Within 5 seconds after step 7 is
performed, close the door.
A chirp sound will be heard, and the
functions will be disabled.
NOTE
function was disabled.
– When disabling by operating the
driver’s door: a chirp will not be
heard
– When disabling by operating the
access key: a chirp will be heard
& When access key does not
operate properly
Refer to “Access key – if access key does
not operate properly” F9-17.
In steps 4 and 6, press the power door
locking switch slowly. If the switch is
pressed quickly, the functions may not
be disabled.
& Replacing battery of access
key
! Enabling functions
When the procedure to disable the functions is performed again, a chirp sound will
be heard, and the functions are enabled.
& Replacing access key
NOTE
. The keyless access function will be
enabled only if you perform the procedure in the same manner you disabled
the function (for example, when disabling by operating the driver’s door,
the function will not be enabled even if
you operate the access key).
. Press the push-button ignition
switch if you do not know the procedure in which the keyless access
Refer to “Replacing battery of access key”
F11-42.
Access keys can be replaced at SUBARU
dealers. For more details, contact a
SUBARU dealer.
2-19
& Certification for keyless access with push-button start
system
. U.S.-spec. models
FCC
FCC
FCC
FCC
ID:
ID:
ID:
ID:
HYQ14AHC
HYQ13CZZ
Y8PSSPIMB02
Y8PSSPLF02
CAUTION
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the
equipment.
NOTE
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.
– CONTINUED –