Subaru Crosstrek Manuals 2017 Crosstrek Owner's Manual | Page 114

2-16 Keys and doors/Keyless access with push–button start system ! Locking with the door lock sensor 1) perform the unlocking operation once first. You can then touch the door lock sensor to lock the doors. function and the remote keyless entry system have not been used for 2 weeks or longer while all doors are locked ! Locking with the rear lock button To recover the keyless access function: Operate one of the following items. – Unlock the doors by operating any procedure other than gripping the front passenger’s door handle – Lock the doors – Open a door and then close it . Case 2: When the access key has been left in the operating range for 10 minutes or longer while all doors are locked Door lock sensor Carry the access key, close all doors (including the rear gate) and touch the door lock sensor on the door handle. All doors including the rear gate will be locked. Also, an electronic chirp will sound once and the hazard warning flashers will flash once. NOTE After touching the door lock sensor to lock all of the doors (including the rear gate), if you touch the door lock sensor once more to attempt the lock operation without first unlocking the doors, nothing will happen, even if the door lock sensor is touched. In this case, 1) Rear lock button Carry the access key, close all doors including the rear gate and press the rear lock button. The rear gate and all doors will be locked. Also, an electronic chirp will sound once and the hazard warning flashers will flash once. ! Power saving function The keyless access function will be disabled in the following cases to protect the access key battery and the vehicle battery. . Case 1: When the keyless access To recover the keyless access function: Operate one of the following items. – Unlock the doors by gripping the door handle – Unlock the doors by pressing the rear gate opener button – Lock the doors by touching the door lock sensor – Lock or unlock the doors by using the remote keyless entry system – Lock or unlock the doors by using the power door locking switch – Open either of the front doors