Subaru Crosstrek Manuals 2016 Crosstrek Owner's Manual | Page 459

8-16 Driving tips/Trailer hitch (Crosstrek models — dealer option) ! Removal and installation of the crossbars Trailer hitch (Crosstrek mod- els — dealer option) WARNING Each of the two roof moldings has two mounting points for crossbars. Each mounting point is fitted with a cover. Use a screwdriver to remove the covers. When installing the crossbars on the roof mold- ing, follow the manufacturer’s instructions. . Never exceed the maximum weight specified for the trailer hitch. Exceeding the maximum weight could cause an accident resulting in serious personal in- juries. Permissible trailer weight changes depending on the situa- tion. For possible recommenda- tions and limitations, refer to “Trailer towing (Crosstrek mod- els)” F8-18. . Trailer brakes are required when the towing load exceeds 1,000 lbs (453 kg). Be sure your trailer has safety chains and that each chain will hold the trailer’s max- imum gross weight. Towing trai- lers without safety chains could create a traffic safety hazard if the trailer separates from the hitch due to coupling damage or hitch ball damage. . Be sure to check the hitch pin and safety pin for positive lock- ing placement before towing a trailer. If the ball mount comes off . . . . the hitch receiver, the trailer could get loose and create a traffic safety hazard. Although towing regulations for trailer or caravan vehicles vary by state/region, all regulations agree that specifications such as the maximum gross trailer weight must not exceed the les- ser of the following: – Maximum gross trailer weight – Maximum gross tongue weight – GVWR – GAWR Failure to comply with the proce- dures set forth will not only compromise your safety, but will also negate your insurance cov- erage and/or may violate the state road and traffic acts and regulations. Use only the ball mount supplied with this hitch. Use the hitch only as a weight carrying hitch. Do not use with any type of weight distributing hitch. The standard bumper beam must be installed after you remove the trailer hitch. Consult a SUBARU