Subaru Crosstrek Manuals 2016 Crosstrek Owner's Manual | Page 244

Instruments and controls/Wiper and washer & Rear window wiper and washer switch – 5-door 3-99 tion, the rear wiper will operate intermit- tently at intervals corresponding to the vehicle speed. In this position, when you move the select lever to the “R” position (CVT models) or the shift lever to the reverse position (MT models), the rear wiper will switch to continuous operation. When you move the select lever/shift lever from the “R” (reverse) position to another position, the rear wiper will return to intermittent operation. CAUTION Windshield washer fluid warning light (type B) The windshield washer fluid warning light illuminates when the washer fluid level in the tank has dropped to the lower limit. If the warning light illumi- nates, refill the tank with fluid. For the refilling procedure, refer to “Wind- shield washer fluid” F11-28. (accompanied by wiper op- : Washer eration) : Continuous NOTE : Intermittent : Off Washer (accompanied by wiper op- : eration) ! Rear wiper To turn the rear wiper on, turn the knob switch upward. To turn the wiper off, return the knob switch to the “ ” position. With the switch turned to the “ Do not attach anything that disturbs the rear wiper operation on the rear gate. Doing so may damage the rear wiper when it operates. ” posi- Even if the rear wiper switch is in the “ ” position, while the shift lever/ select lever is in the “R” position with the front windshield wiper operating continuously, the rear wiper will oper- ate intermittently (reverse gear inter- locked rear wiper). ! Washer To wash the rear window while the rear wiper is operating, turn the knob switch upward to the “ ” position. The washer – CONTINUED –