Subaru Crosstrek Manuals 2016 Crosstrek Owner's Manual | Page 174

Instruments and controls/Warning and indicator lights Inside warning chime Outside warning chime Long beep (continuous) Long beep (continuous) Long beep (continuous) — Access key Operation indica- warning indica- tor on push-but- tor on meter ton ignition switch (Flashes 1 sec. intermittent) — 3-29 Status Action — The driver exited the vehicle with the access key and closed the driver’s door while the push-button ignition switch is in a position other than “OFF” and the select lever is in a position other than the “P” position. Shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle. — Select lever position warning: The engine is turned off by pressing the push-button ignition switch and the select lever is in a position other than the “P” position. Start the engine, shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle. Shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle. Long beep (continuous) — — — Select lever position warning: The driver’s door was opened while the push-button ignition switch is in a position other than “OFF” and the select lever is in a position other than the “P” position. Ding — — — the battery of the access The battery of the access key is low. Replace key. Ding — — Flashes in green Steering lock warning: The engine start procedure was (15 seconds performed, but the steering is still max.) locked. While turning the steering wheel right and left lightly, depress the brake pedal and press the push- button ignition switch. Ding — — System malfunction warning: Flashes in orange A malfunction was detected in the power system or steering lock. Contact a SUBARU dealer immedi- ately and have the vehicle in- spected. – CONTINUED –