Instruments and controls/Meters and gauges
your vehicle under emergency conditions.
The hazard warning flasher works regard-
less of the position of the ignition switch. Meters and gauges
To turn on the hazard warning flasher,
push the hazard warning button on the
instrument panel. To turn off the flasher,
push the button again. Some of the meters and gauges on the
combination meter use liquid-crystal
displays. You will find their indications
hard to see if you wear polarized
glasses.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.
NOTE
& Combination meter illumina-
tion
When the ignition switch is turned to the
“ON” position, various parts of the combi-
nation meter will illuminate in the following
sequence.
3-9
& Canceling the function for
meter/gauge needle move-
ment upon turning on the
ignition switch
It is possible to activate or deactivate the
movement of the meter needles and
gauge needles that takes place when the
ignition switch is turned to the “ON”
position.
! Type A combination meter
To change the setting, perform the follow-
ing procedure.
1. Turn the ignition switch to the “LOCK”/
“OFF” or “ACC” position.
1. Warning lights, indicator lights, meter
needles, gauge needles and liquid crystal
display illuminate.
2. Meter and gauge indications each
show MAX position.
3. Meter and gauge indications each
show MIN position.
4. Regular illumination (for driving) be-
gins.
1)
Trip knob
2. Press the trip knob to show “
“ ” on the trip meter display.
” or
– CONTINUED –