Seat, seatbelt and SRS airbags/Child restraint systems
! Tether anchorages
1-35
! To install a child restraint system
using lower and tether anchorages
To install a child restraint system using
lower and tether anchorages, perform the
following procedure.
WARNING
Before installing a child restraint
system, be sure to confirm that the
seatback is securely locked into
place. Otherwise, in an accident,
serious injury or death could result.
The tether anchorages (upper anchorages) are provided at the locations
shown in the above illustration. For details, refer to “Top tether anchorages” F137.
1. Shake the seatback slightly to confirm
that it is securely locked into place.
– It is possible to check whether the
seatback is locked visually. If the
seatback is locked into place, the red
colored unlocking marker which is
attached to the bottom of the lock
release knob is invisible. For details,
refer to “Folding down the rear seatback” F1-10.
2. You will find marks “ ” at the bottom of
the rear seat seatbacks. These marks
indicate the positions of the lower anchorages (bars).
Remove the covers and locate the lower
anchorages (bars).
– CONTINUED –