Seat, seatbelt and SRS airbags/Seatbelts
WARNING
Fastening the seatbelt with the webbing twisted can increase the risk or
severity of injury in an accident.
When fastening the belt after it is
pulled out from the retractor, especially when inserting the connector’s tongue plate into the mating
buckle (on right-hand side), always
check that the webbing is not
twisted.
1-17
WARNING
. Be sure to fasten both tongue
plates to the respective buckles.
If the seatbelt is used only as a
shoulder belt (with the connector’s tongue plate not fastened to
the connector’s buckle on the
right-hand side), it cannot properly restrain the wearer in position in an accident, possibly
resulting in serious injury or
death.
. The head restraint is not intended
to be used at the lowest position.
Before sitting on the seat, raise
the head restraint to the extended position. Otherwise, in
an accident, serious injury or
death could result.
1. Raise the head restraint to the extended position. Do not remove the head
restraint.
2. Remove the tongue plate from the belt
holder on the right side of the cargo area
and pull out the seatbelt slowly.
– CONTINUED –