Subaru Crosstrek Manuals 2016 Crosstrek Hybrid Owner's Manual | Page 453

11-4 Maintenance and service/Maintenance precautions system or it can render it inoperative. NEVER use a circuit tester for this wiring. If your SRS airbag or seatbelt pretensioner needs service, consult your nearest SUBARU dealer. NOTE SUBARU does not endorse the use of non-SUBARU approved flushing systems and strongly advises against performing these services on a SUBARU vehicle. Non-SUBARU approved flushing systems use chemicals and/or solvents which have not been tested or approved by SUBARU. SUBARU warranties do not cover any part of the vehicle which is damaged by adding or applying chemicals and/or solvents other than those approved or recommended by SUBARU. & Before checking or servicing in the engine compartment WARNING . Always turn the ignition switch to the “OFF” position and apply the parking brake to prevent the vehicle from moving. . Always let the engine cool down. Engine parts become very hot when the engine is running and remain hot for some time after the engine is stopped. . Do not spill engine oil, engine coolant, brake fluid or any other fluid on hot engine components. This may cause a fire. . When the ignition switch is in the “ON” position, the cooling fan may operate suddenly even when the hybrid system is stopped. If your body or clothes come into contact with a rotating fan, that could result in serious injury. To avoid risk of injury, always turn the push-button ignition switch to the “OFF” position and confirm that the operation indicator on the switch is turned off. Then take the access key out from the vehicle. . Before performing any servicing on a vehicle equipped with a remote engine start system (if equipped), temporarily place the remote engine start system in service mode to prevent it from unexpectedly starting the hybrid system. & When checking or servicing in the engine compartment WARNING When performing inspection or maintenance, if there is no need to operate the engine, ensure that the ignition switch is in the “OFF” position. If you are performing inspection or maintenance while the electric motor is in operation, the engine could start during the work and possibly lead to serious injury. CAUTION D