9-20
In case of emergency/Towing
the vehicle and stow it in the cargo area.
Fit the towing hook cover on the bumper.
! Rear tie-down holes
WARNING
Use the rear tie-down holes only for
downward anchoring. If they are
used to anchor the vehicle in any
other direction, cables may slip out
of the holes, possibly causing a
dangerous situation.
WARNING
. Do not use the towing hook
except when towing your vehicle.
. Be sure to remove the towing
hook after towing. Leaving the
towing hook mounted on the
vehicle could interfere with proper operation of the fuel pump
shut off function when the vehicle is struck from behind.
& Using a flat-bed truck
! Front tie-down hooks
1)
The front tie-down hooks are located
between each of the front tires and the
front bumper.
Rear tie-down hole
The rear tie-down holes are located near
each of the jack-up reinforcements.
This is the best way to transport your
vehicle. Use the following procedures to
ensure safe transportation.
1. Shift the select lever into the “P”
position.
2. Pull up the parking brake lever firmly.
3. Secure the vehicle onto the carrier
properly with safety chains. Each safety