9-6
In case of emergency/In case of a flat tire
could be spilled.
. If sealant gets on your clothing, it
might be difficult or impossible to
remove.
WARNING
Observe the following when using
the compressor. Failure to do so
could result in a fire or electric
shock.
. Before using the compressor,
check the power cord for damage. A damaged power cord
could result in an electric shock.
. Do not operate the compressor
with wet hands.
. If fire, smoke, odd odors, or any
other abnormal situation occurs
while using the compressor, discontinue use immediately, disconnect the power cord, and
contact a SUBARU dealer for
assistance.
CAUTION
Observe the following when using
the compressor. Failure to do so
could result in damage to the compressor.
. Do not operate the compressor
continuously for 10 minutes or
longer.
. Keep water away from the compressor. When working in rainy
conditions, keep the compressor
in a dry location.
. Do not use the compressor in
dusty or sandy locations.
. Stop using the compressor if it
becomes hot to the touch or its
operation becomes sluggish.
Confirm that the compressor
has cooled down before using it
again.
. Do not disassemble or modify the
compressor. Avoid subjecting
the compressor to physical impacts.
! Before use
1. Park your vehicle in a safe location on
a flat, hard surface. Ensure that it does not
interfere with traffic.
2. Turn off the ignition switch.
3. Turn on the hazard warning flashers,
and have the passengers get out of the
vehicle and stand in safe place.
4. If necessary, move your vehicle so that
the valve on the punctured tire is at the
bottom.
5. Make sure the parking brake is applied.
6. Raise the driver’s seat to the highest
position, and then slide it as far forward as
possible. For details, refer to “Front seats”
F1-2.
7. Detach the locking plate, and take out
the flat tire repair kit.
WARNING
Do not place anything under the
driver’s seat other than the flat tire
repair kit. That may interfere with
front seat locking and cause an
accident.