7-14
Starting and operating/Continuously variable transmission
& Entering the vehicle while it
is running via remote start
& Pre-heating or pre-cooling
the interior of the vehicle
1. Unlock the vehicle doors using the
keyless access function or remote keyless
entry system. If the vehicle’s doors are
unlocked manually using the mechanical
key, the vehicle’s alarm system will trigger
(if the alarm system is armed prior to
activating the remote engine start system)
and the hybrid system will turn off. Perform either of the following procedures to
disarm the alarm system. Refer to “Alarm
system” F2-21.
. Turn the push-button ignition switch
to the “ACC” or “ON” position.
. Press any button on the access key.
2. Enter the vehicle.
3. The hybrid system will shut down
when any door or rear gate is opened.
4. Press the push-button ignition switch
while depressing the brake pedal to restart
the hybrid system.
Before exiting the vehicle, set the temperature controls to the desired setting
and operation. After the system starts the
hybrid system, the heater or air conditioning will activate and heat or cool the
interior to your setting.
& Entering the vehicle following remote engine start shutdown
An alarm trigger may occur if the vehicle is
opened by the remote keyless entry
transmitter within a few seconds immediately following remote engine start shutdown.
& System maintenance
! Changing the battery
Perform the procedure described in “Replacing access key battery” F11-45.
Continuously variable transmission
WARNING
Do not shift from the “P” or “N”
position into the “D” or “R” position
while depressing the accelerator
pedal. This may cau 6RF