Instruments and controls/Mirrors
tion, the rear wiper will operate intermittently at intervals corresponding to the
vehicle speed. In this position, when you
move the select lever to the “R” position,
the rear wiper will switch to continuous
operation. When you move the select
lever from the “R” position to another
position, the rear wiper will return to
intermittent operation.
CAUTION
Do not attach anything that disturbs
the rear wiper operation on the rear
gate. Doing so may damage the rear
wiper when it operates.
wiper is not in use, turn the knob switch
downward to the “ ” position. The washer
fluid sprays and the wiper operates until
you release the knob.
NOTE
When the amount of washer fluid is
getting low, the rear washer will run out
of fluid before the windshield washer.
This means that the amount of washer
fluid is low, and it should be added
immediately.
3-85
Mirrors
Always check that the inside and outside
mirrors are properly adjusted before you
start driving.
& Inside mirror
NOTE
Even if the rear wiper switch is in the
“ ” position, while the select lever is in
the “R” position with the front windshield wiper operating continuously,
the rear wiper will operate intermittently (reverse gear interlocked rear
wiper).
! Washer
To wash the rear window while the rear
wiper is operating, turn the knob switch
upward to the “ ” position. The washer
fluid sprays until you release the knob.
To wash the rear window when the rear
The inside mirror has a day and night
position. Pull the tab at the bottom of the
mirror toward you for the night position.
Push it away for the day position. The
night position reduces glare from headlights.
– CONTINUED –