2-32
Keys and doors/Moonroof
ignition switch is in the “ON” position.
& Moonroof switches
! Tilting moonroof
Release the switch after the moonroof has
been raised or has been lowered completely. Pressing the switch continuously
may cause damage to the moonroof.
! Sliding moonroof
To close:
Press and hold the front side of the
“OPEN/CLOSE” switch.
To stop the moonroof at a selected midway position while opening or closing it,
momentarily push the switch to the
“OPEN” side or “CLOSE” side.
After washing the vehicle or after it rains,
wipe away water on the roof prior to
opening the moonroof to prevent drops
of water from falling into the passenger
compartment.
NOTE
1)
2)
Raise
Lower
The tilting function is activated only when
the moonroof is fully closed.
To raise:
Press the rear side of the “UP/DOWN”
switch momentarily. The moonroof raises
completely.
To lower:
Press and hold the front side of the “UP/
DOWN” switch until the preferred position
has reached.
1)
2)
Open
Close
To open:
Press and hold the rear side of the
“OPEN/CLOSE” switch. The sun shade
will also be opened together with the
moonroof. The moonroof will stop at a
position approximately 1.6 in (4 cm) away
from the fully opened position. Press and
hold the rear side of the switch again to
open the moonroof completely.
Driving with the moonroof fully open
can cause an annoying sound to be
generated at high speeds. If this occurs, use the moonroof at the initial
stop position of 1.6 in (4 cm) away from
the fully opened position.
! Anti-entrapment function
When the moonroof senses a substantial
enough object trapped between its glass
and the vehicle’s roof during closure, it
automatically moves back to the fully open
position and stops there. The anti-entrapment function may also be activated by a
strong shock on the moonroof even when
there is nothing trapped.