2-2
Keys and doors/Keyless access with push–button start system
Keyless access with pushbutton start system
“Starting and stopping the hybrid system”
F7-9.
. Arming and disarming the alarm system. For detailed information, refer to
“Alarm system” F2-21.
Locking and unlocking by the remote
keyless entry system can also be controlled with the buttons on the access key.
For detailed information, refer to “Remote
keyless entry system” F2-19.
A mechanical key is attached to each
access key. The mechanical key is used
for the following operations.
. Locking and unlocking the driver’s door
. Locking and unlocking the glove box
1)
2)
3)
Access key (main)
Access key (sub)
Key number plate
The vehicle has two access keys and a
key number plate. For details about the
key number plate, refer to “Key number
plate” F2-2.
The keyless access with push-button start
system allows you to perform the following
functions when you are carrying the
access key.
. Locking and unlocking of the doors and
rear gate
. Starting and stopping the hybrid system. For detailed information, refer to
You cannot unlock the glove box without
using the mechanical key. You can keep
the glove box locked when you leave your
vehicle and the access key (with the
mechanical key removed) at a parking
facility.
1)
2)
Release button
Mechanical key
While pressing the release button of the
access key, take out the mechanical key.
& Key number plate
The key number is stamped on the key
number plate attached to the key set.
Write down the key number and keep it in
another safe place, not in the vehicle. This
number is needed to make a replacement
key if you lose your key or lock it inside the
vehicle. Refer to “Key replacement” F213.