Subaru Crosstrek Manuals 2015 XV EyeSight® Driving Assist System Manual | Seite 43

Adaptive Cruise Control

How to use Adaptive Cruise Control
Adaptive Cruise Control is available when the engine is turned on.

Setting Adaptive Cruise Control
(1) Setting Adaptive Cruise Control to standby status
Press the
(CRUISE) switch. At this time, “
” (Adaptive Cruise Control), your vehicle indicator and the “following distance setting” are displayed on the EyeSight display area
in the multi information display.
The set vehicle speed display will read “- - MPH”.

S01332

S01333

If the switch is pressed once more, the EyeSight display will turn off. It will also automatically
turn off when the engine is stopped.
To set ready status:
Adaptive Cruise Control can be set when all
of the following conditions are met and
is displayed on the EyeSight display area.
- All doors (except the rear gate/trunk) are
closed.
- The driver’s seatbelt is fastened.
- The selector lever is in the D position
and the paddle shift is not operated.
- The brake pedal is not depressed.
S01334
- EyeSight operation is not temporarily
stopped.
Refer to page 78.
- The road is not a steep slope.
- The steering wheel has not been turned significantly in either direction.
- The vehicle speed is between approximately 0 MPH (0 km/h) and 90 MPH (145 km/h).
- Parking brake is released.

39