5-72
Audio/Media operation
! Using aha application
If you connect a smartphone to this
system after starting a supported aha
application on the smartphone, you can
display and operate the aha application
displayed on the smartphone on the
system screen.
3. Select “aha” on the “Select Audio
Source (Select Audio Source)” screen.
Refer to “Basic operation” F5-12.
Select “aha” on the “Apps (APPS)” screen.
Refer to “STARLINK” F5-30.
4. Check that the top screen is displayed.
NOTE
. Connect a smartphone to the USB
port before turning the ignition switch
to the “ACC” or “ON” position.
. When it is not played back normally,
press the POWER/VOLUME knob twice
while a USB cable is connected.
1. Run the aha application on your
smartphone.
2. Connect the iPhone/iPod touch to the
USB port or connect the Android device
by utilizing the Bluetooth connection (SPP
and A2DP profile).
. For details about connecting an
iPhone/iPod touch: Refer to “Connecting and disconnecting a USB memory/
portable device” F5-6.
. For details about registering or connecting an Android device: Refer to
“Registering/connecting Bluetooth®
device” F5-81.
Press AUDIO/TUNE knob twice to switch
between iPhone and Android.
5. Select the desired station.
6. Check that the station operation
screen is displayed.
. Main functions of the station operation screen button: Refer to “Station
operation screen buttons” F5-73.
. For details on the services or the
operations, check the aha site
(http://www.aharadio.com) on the internet.
NOTE
. When iPhone/iPod touch and Android devices are connected at the
same time, iPhone/iPod touch is prioritized.
. The following operations are not
available on this system. Perform these
operations on the smartphone.
– Add/Reorder/Delete stations
– Login to Facebook/Twitter