3-94
Instruments and controls/Illumination brightness control
& One-touch lane changer
To flash the turn signal and turn signal
indicator light three times, push the turn
signal lever up or down slightly and
immediately release it.
Illumination brightness control
To darken, turn the control dial downward.
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the automatic dimming function does not work
at all.
. The brightness setting is not canceled even when the ignition switch is
turned to the “LOCK” (off) position.
The operational/non-operational setting of
the one-touch lane changer’s can be
changed by a SUBARU dealer. Contact
the nearest SUBARU dealer for details.
The illumination brightness of the instrument panel dims under the following
conditions.
” or
. when the light switch is in the “
“ ” position
. when the light control switch is in the
“AUTO” position and the headlights illuminate automatically (models with auto on/
off headlights: Refer to “Headlights” F390.)
You can also adjust the illumination brightness for better visibility in the following
ways.
To brighten, turn the control dial upward.