2-32
Keys and doors/Alarm system
system will automatically arm and doors
will automatically lock.
& Disarming the system
Perform either of the following procedures.
. Briefly press the disarm button (for less
than 2 seconds) on the access key/remote
transmitter.
. Carry the access key and perform
either of the following procedures (models
with “keyless access with push-button
start system”).
– Grip the front door handle.
– Press the rear gate opener button
(5-door).
The following door(s) will unlock, an
electronic chirp will sound twice and the
hazard warning flashers will flash twice.
. Driver’s door: when either of the
following procedures is performed
– Press the disarm button on the
access key/remote transmitter briefly
(for less than 2 seconds).
– Grip the driver’s door handle (models with “keyless access with pushbutton start system”).
. Rear gate (5-door): when pressing the
rear gate opener button (models with
“keyless access with push-button start
system”)
. All doors: when gripping the front
passenger’s door handle (models with
“keyless access with push-button start
system”)
placing battery of access key” F11-45.
& Valet mode
The flashing of the security indicator light
will then change slowly (once approximately every 3 seconds from twice approximately every 2 seconds), indicating
that the alarm system has been disarmed.
When you choose the valet mode, the
alarm system does not operate. In valet
mode, the remote transmitter is used only
for locking and unlocking the doors and
rear gate (5-door) and panic activation.
To unlock all other doors and the rear gate
(5-door), briefly press the disarm button a
second time within 5 second